
GB Home · Cement-coated tile backer
Know your tile backer board
Choose the board, compare pack sizes and plan your quantity before you start tiling.

1200 × 600 mm
Full-size boards for your project layout.
0.72 m² per board
Nominal coverage before cuts and waste.
Coated surface
Reinforced cementitious coating around an XPS core.
Choose your thickness
Match the complete installation build-up, not just the tile height.
Compare thicknesses
Prices below are per individual board, including VAT. Thickness alone does not establish suitability: check the substrate, support, tile system and installation instructions.
Know your board
| Core | Extruded polystyrene (XPS) |
|---|---|
| Board dimensions | 1200 × 600 mm |
| Surface | Reinforced cementitious coating |
| Single listing quantity | One board per unit; minimum 5 boards per thickness. |
Plan your quantity
Measure the area, divide by 0.72 and round up. Add an allowance for cuts and waste that suits your layout.
10 m² needs 14 boards before waste; with 10% allowance, plan 16 boards.Compare quantities
Totals below are multiples of the current individual-board price, not discounted packs. All prices include VAT; delivery is extra at checkout. Coverage is before waste. Choose the thickness and enter your required quantity in the buying controls above. Separate packs will appear here when available.
A board is part of a complete system
Check the substrate, fixing pattern, adhesive and tile-system requirements. In wet areas, joints, fixings and penetrations need the specified treatment. A coated board alone is not a complete waterproof installation.
Looking for plain insulation without a cement coating? Compare plain XPS boards →
Before you order
Is this the same as plain XPS insulation?
No. These tile backer boards have a reinforced cementitious coating around an XPS core. Plain XPS does not have that coating. Choose the board required by your installation system.
Which thickness should I choose?
Use the thickness specified for your substrate, support arrangement and floor or wall build-up. The listing retains its existing 12 mm option; check the supplied board specification if your design requires an exact nominal thickness.
Can I plan for a thickness that is sold out?
Yes. Specifications and pack options remain visible for planning. Availability is shown beside each option; contact us before scheduling installation around a restock.
£9.99Available to order